AM General Wiper Blades

How to Change Trico 1999 AM General Hummer Wiper Blades

Always check your vehicle's owner's manual for specific instructions on changing your wiper blades before removing/installing your wiper blades.
  1. Buy your new Trico® Standard Steel Frame Wipers

  2. Prepare your AM General Hummer for an easier wiper change

    Turn ON your wipers then turn off your AM General Hummer when the wipers are at their mid-way point on your windshield

  3. Lift your wipers up from the windshield

    With your wipers stopped midway on your windshield it should be easy to lift your wipers up and away from your windshield.
    Your old wipers should stick out, away, from your windshield. Now allowing for easy access during the rest of the changing process.

  4. Before you remove old wiper blades

    Be sure to take note of which new blade length goes on which side.
    Measure or just compare old blade length to the new Trico® wiper blades.
    Then place the new blades on the correct side.

  5. Remove old wiper blades

    Your 1999 AM General Hummer has a side lock attachment for the windshield wipers to connect with.

    Different wiper manufacturers use different style attachments for the side lock. Look for a button or a latch to lift and slide off the old wiper blade.

  6. Connect the new Trico® Standard Steel Frame Wipers

    • Push the blade on to the arm pin until it locks in place.


  7. Check all connections...

    Double check that wiper blades and adapters are locked on to the wiper arms.

  8. Lower wipers back down to their functional positions.

    Carefully lower your new wipers down to your windshield. Discard old wipers and packaging material.


Congratulations! You just installed new Trico® Standard Steel Frame Wipers on your 1999 AM General Hummer!


Because we guarantee them to fit
Rain-X WipersWiperBladesUSA WipersTrico Wipers
we sell only the very best wipers in the USA!