Makes
More Car Makes

Audi Q7 Years
More Audi Q7 Years

Audi Models
More Audi Models
Audi Wiper Blades

How to Change 2013 Audi Q7 Rain-X® Wiper Blades

Always check your vehicle's owner's manual for specific instructions on changing your wiper blades before removing/installing your wiper blades.
  1. Buy your new Rain-X® Latitude® w/Repellency Beam Blade wipers

    • Great all-weather beam wipers from Rain-X with rain Repellency built in
    • Beam blades from Rain-X contour to the curvature of your windshield to provide even wiping pressure along the full length of the blade. That means there are no frozen wiper joints to cause uneven wiping and streaking.
    • These beam blades are coated with the famous Rain-X water repellency coating
    • Just smooth consistently safe windshield wiping for your Audi Q7
    • Buy your Rain-X Latitude w/Repellency Beam Blade wipers for your 2013 Audi Q7 $27.99 ea.

  2. Prepare your Audi Q7 for an easier wiper change

    Turn ON your wipers then turn off your Audi Q7 when the wipers are at their mid-way point on your windshield

  3. Lift your wipers up from the windshield

    With your wipers stopped midway on your windshield it should be easy to lift your wipers up and away from your windshield.
    Your old wipers should stick out, away, from your windshield. Now allowing for easy access during the rest of the changing process.

  4. Before you remove old wiper blades

    Be sure to take note of which new blade length goes on which side.
    Measure or just compare old blade length to the new wiper blades.
    Then place the new blades on the correct side.

  5. Remove old wiper blades

    Your 2013 Audi Q7 has a Pinch Tab (I&L) attachment for the windshield wipers to connect with.

    Different wiper manufacturers use different style attachments for the Pinch Tab. Look for a button or a latch to lift and slide off the old wiper blade.

  6. Connect the new Rain-X Latitude w/Repellency Beam Blade wipers

    • First pry off the adapter cover. Slide thumb nail under the corner of the cover and pull off with your other hand.

      Remove and discard outer cover.
    • Next you remove the BLUE connector. Rotate entire universal connector up and pinch together the front facing tabs.

      Use your other hand to PUSH DOWN and remove the Blue spacer.
    • Insert the curved tab under the Rain-X logo.
      Slide the blade down the arm, through the adapter channel until it CLICKS.
      The rear adapter tabs will lock in to place.
    • Be sure to REMOVE PLASTIC COVER FROM THE BLADE
    • Check all connections...

      Tug on the wipers to double check that all wiper blades are locked on to the wiper arms.

    • Lower wipers back down to their functional positions.

      Carefully lower your new wipers down to your windshield. Discard old wipers and packaging material.

    • Finally Activate the Rain-X Water Repellency Technology.

      • Be sure your windshield is clean and dry.
      • Turn ON your new wiper blades. Run them DRY on your windshield for 2-3 minutes.
      • Then briefly spray your washer fluid and watch for water beading. That indicates the technology has been activated.



Congratulations! You just installed new Rain-X Latitude with Water Repellency Beam Blade wipers on your 2013 Audi Q7!


Having Trouble?

If you have a different AttachType than what we have listed please select the wiper arm type that best matches your vehicle:

Because we guarantee them to fit
Rain-X WipersWiperBladesUSA WipersTrico Wipers
we sell only the very best wipers in the USA!