Makes
More Car Makes

BMW 640i xDrive Years
More BMW 640i xDrive Years

BMW Models
More BMW Models
BMW Wiper Blades

How to Change 2014 BMW 640i xDrive Wiper Blades

  1. Buy your new Trico® Force Premium Beam Blade wipers

    • Great all-weather premium beam wipers from Trico® The Leader in Wiper Blade Technology.
    • Beam blades from Trico® are a sleek low-profile styled "Memory Curved Steel®" beam covered in rubber and plastic to keep out rain, ice and debris. That means there are no frozen wiper joints to cause uneven wiping and streaking.
    • Trico® Force has additional air foils to keep the blades stuck to the windows at higher speeds and No lifting in high winds.
    • Just smooth consistently safe windshield wiping for your BMW 640i xDrive
    • Buy your Trico® Force Premium Beam Blade wipers for your 2014 BMW 640i xDrive $20.95 ea.

  2. Prepare your BMW 640i xDrive for an easier wiper change

    Turn ON your wipers then turn off your BMW 640i xDrive when the wipers are at their mid-way point on your windshield

  3. Lift your wipers up from the windshield

    With your wipers stopped midway on your windshield it should be easy to lift your wipers up and away from your windshield.
    Your old wipers should stick out, away, from your windshield. Now allowing for easy access during the rest of the changing process.

  4. Before you remove old wiper blades

    Be sure to take note of which new blade length goes on which side.
    Measure or just compare old blade length to the new Trico® wiper blades.
    Then place the new blades on the correct side.

  5. Remove old wiper blades

    Your 2014 BMW 640i xDrive has a side pin attachment for the windshield wipers to connect with.
    Rotate the blade until you can pull it off the pin as shown.

    Different wiper manufacturers use different style attachments for the side pin. Look for a button or a latch to lift and slide off the old wiper blade.

  6. Remove plastic protector

    Before installation, of the new wiper blade, slide off the plastic protector from the blade rubber.

  7. Connect the new Trico® Force Premium Beam Blade wipers

    With this arm type it is necessary to remove the preattached adapter on the wiper blade and replace it as follows with adapter BC.
    1. Identify the release tabs on the preattached adapter.


    2. Using your index fingernails, pull both release tabs toward you.


    3. The pre-attached adaptor will tilt toward you and disengage from the blade.
    Discard.


    4. Locate adaptor (BC) and position it so the release tabs are up.
    Tilt adapter (BC) back in to the cavity in the blade until it "clicks" in place.


    5. IMPORTANT: Both release tabs must lock in to place before proceeding to the next step.


    6. Hold the blade at a 90o angle to the end of the wiper arm and push it all the way on to the arm pin.


    7. Rotate the blade until the tab on the top of the arm straddles the top of the blade.

    8. The wiper blade will lock on to the arm where indicated.


  8. Check all connections...

    Double check that wiper blades and adapters are locked on to the wiper arms.

  9. Lower wipers back down to their functional positions.

    Carefully lower your new wipers down to your windshield. Discard old wipers and packaging material.


Congratulations! You just installed new Trico® Force Premium Beam Blade wipers on your 2014 BMW 640i xDrive!


  1. Buy your new Trico® Force Premium Beam Blade wipers

    • Great all-weather premium beam wipers from Trico® The Leader in Wiper Blade Technology.
    • Beam blades from Trico® are a sleek low-profile styled "Memory Curved Steel®" beam covered in rubber and plastic to keep out rain, ice and debris. That means there are no frozen wiper joints to cause uneven wiping and streaking.
    • Trico® Force has additional air foils to keep the blades stuck to the windows at higher speeds and No lifting in high winds.
    • Just smooth consistently safe windshield wiping for your BMW 640i xDrive
    • Buy your Trico® Force Premium Beam Blade wipers for your 2014 BMW 640i xDrive $20.95 ea.

  2. Prepare your BMW 640i xDrive for an easier wiper change

    Turn ON your wipers then turn off your BMW 640i xDrive when the wipers are at their mid-way point on your windshield

  3. Lift your wipers up from the windshield

    With your wipers stopped midway on your windshield it should be easy to lift your wipers up and away from your windshield.
    Your old wipers should stick out, away, from your windshield. Now allowing for easy access during the rest of the changing process.

  4. Before you remove old wiper blades

    Be sure to take note of which new blade length goes on which side.
    Measure or just compare old blade length to the new Trico® wiper blades.
    Then place the new blades on the correct side.

  5. Remove old wiper blades

    Your 2014 BMW 640i xDrive has a side pin attachment for the windshield wipers to connect with.
    Rotate the blade until you can pull it off the pin as shown.

    Different wiper manufacturers use different style attachments for the side pin. Look for a button or a latch to lift and slide off the old wiper blade.

  6. Remove plastic protector

    Before installation, of the new wiper blade, slide off the plastic protector from the blade rubber.

  7. Connect the new Trico® Force Premium Beam Blade wipers

    With this arm type it is necessary to remove the preattached adapter on the wiper blade and replace it as follows with adapter BC.
    1. Identify the release tabs on the preattached adapter.


    2. Using your index fingernails, pull both release tabs toward you.


    3. The pre-attached adaptor will tilt toward you and disengage from the blade.
    Discard.


    4. Locate adaptor (BC) and position it so the release tabs are up.
    Tilt adapter (BC) back in to the cavity in the blade until it "clicks" in place.


    5. IMPORTANT: Both release tabs must lock in to place before proceeding to the next step.


    6. Hold the blade at a 90o angle to the end of the wiper arm and push it all the way on to the arm pin.


    7. Rotate the blade until the tab on the top of the arm straddles the top of the blade.

    8. The wiper blade will lock on to the arm where indicated.


  8. Check all connections...

    Double check that wiper blades and adapters are locked on to the wiper arms.

  9. Lower wipers back down to their functional positions.

    Carefully lower your new wipers down to your windshield. Discard old wipers and packaging material.


Congratulations! You just installed new Trico® Force Premium Beam Blade wipers on your 2014 BMW 640i xDrive!


2014 BMW 640i xDrive Wiper Size Guide
Buy 2014 BMW 640i xDrive Wiper Blades
We sell only Trico Wipers wipers.
The most popular wipers in the USA!