Makes
More Car Makes

BMW Alpina B7 xDrive Years
More BMW Alpina B7 xDrive Years

BMW Models
More BMW Models
BMW Wiper Blades

How to Change 2011 BMW Alpina B7 xDrive Rain-X® Wiper Blades

Always check your vehicle's owner's manual for specific instructions on changing your wiper blades before removing/installing your wiper blades.
  1. Buy your new Rain-X® Latitude® Beam Blade wipers

    • Great all-weather beam wipers from Rain-X
    • Beam blades from Rain-X contour to the curvature of your windshield to provide even wiping pressure along the full length of the blade. That means there are no frozen wiper joints to cause uneven wiping and streaking.
    • Just smooth consistently safe windshield wiping for your BMW Alpina B7 xDrive
    • Buy your Rain-X Latitude Beam Blade wipers for your 2011 BMW Alpina B7 xDrive $26.99 ea.

  2. Prepare your BMW Alpina B7 xDrive for an easier wiper change

    Turn ON your wipers then turn off your BMW Alpina B7 xDrive when the wipers are at their mid-way point on your windshield

  3. Lift your wipers up from the windshield

    With your wipers stopped midway on your windshield it should be easy to lift your wipers up and away from your windshield.
    Your old wipers should stick out, away, from your windshield. Now allowing for easy access during the rest of the changing process.

  4. Before you remove old wiper blades

    Be sure to take note of which new blade length goes on which side.
    Measure or just compare old blade length to the new wiper blades.
    Then place the new blades on the correct side.

  5. Remove old wiper blades

    Your 2011 BMW Alpina B7 xDrive has a Pin & Hoook (P&H) style attachment for the windshield wipers to connect with.
    Different wiper manufacturers use different style attachments for the Pin & Hoook (P&H) attach type. Lift arm away from windshield & rotate the wiper then pull off the old wiper blade.

  6. Connect the new Rain-X Latitude Beam Blade wipers

    • You must remove the pre-installed "small J hook" adapter.
      Use a pen or screwdriver to pop it free and remove it.

    • Hold the blade upside down and perpendicular to the arm.
      Slide the arm pin through the smaller of the double set of holes on the adapter
    • Now rotate the blade until it's held by the hook of the arm.
    • Be sure to REMOVE PLASTIC COVER FROM THE BLADE


  7. Check all connections...

    Tug on the wipers to double check that all wiper blades are locked on to the wiper arms.

  8. Lower wipers back down to their functional positions.

    Carefully lower your new wipers down to your windshield. Discard old wipers and packaging material.


Congratulations! You just installed new Rain-X Latitude Beam Blade wipers on your 2011 BMW Alpina B7 xDrive!


Having Trouble?

If you have a different AttachType than what we have listed please select the wiper arm type that best matches your vehicle:

Because we guarantee them to fit
Rain-X WipersWiperBladesUSA WipersTrico Wipers
we sell only the very best wipers in the USA!