How to Change Trico 2021 Buick Encore Wiper Blades

1. Buy your new Trico® Force Premium Beam Blade wipers

   • Great all-weather premium beam wipers from Trico® The Leader in Wiper Blade Technology.
   • Beam blades from Trico® are a sleek low-profile styled "Memory Curved Steel®" beam covered in rubber and plastic to keep out rain, ice and debris. That means there are no frozen wiper joints to cause uneven wiping and streaking.
   • Trico® Force has additional air foils to keep the blades stuck to the windows at higher speeds and No lifting in high winds.
   • Just smooth consistently safe windshield wiping for your Buick Encore
   • Buy yourTrico® Force Premium Beam Blade wipers for your 2021 Buick Encore $24.99 ea.

   

2. Prepare your Buick Encore for an easier wiper change

   Turn ON your wipers then turn off your Buick Encore when the wipers are at their mid-way point on your windshield
   

3. Lift your wipers up from the windshield

   With your wipers stopped midway on your windshield it should be easy to lift your wipers up and away from your windshield.
   Your old wipers should stick out, away, from your windshield. Now allowing for easy access during the rest of the changing process.

   

4. Before you remove old wiper blades

   Be sure to take note of which new blade length goes on which side.
   Measure or just compare old blade length to the new Trico® wiper blades.
   Then place the new blades on the correct side.

5. Remove old wiper blades

   Your 2021 Buick Encore has a "Wide" (22mm) Push Button attachment for the windshield wipers to connect with.
   
   Different wiper manufacturers use different style attachments for the "Wide" (22mm) Push Button.
   Press the button and slide off the old wiper blade.

6. Remove plastic protector

   Before installation, of the new wiper blade, slide off the plastic protector from the blade rubber.

7. Connect the new Trico® Force Premium Beam Blade wipers

   With this arm type it is necessary to remove the preattached adapter on the wiper blade and replace it as follows with adapter BC.
   1. Identitfy release tab for the preattached adapter.
   
   
   2. Identitfy the release tabs [PRESS] for the pre-attached adapter.
   Pinch the tabs at the back of the adapter, then rotate it up to a 35 degree angle.
   
   
   3. Lift the adapter until it disengages from the blade.
   
   
   4. Push the pre-attached adaptor towards the button to disengage it from the blade.
   Discard.
   
   
   5. Find included adapter "B/C". Rotate it to a 35degree angle.
   
   Lower the adapter to the pin until it clicks in place.
   Adapter B/C must lock on the to blade before you move on to the next step
   
   
   6. Hold your thumb on the front of the adapter. Slide adapter in the opposite direction from the tab until it locks in place.
   
   
   7. The button on the adapter must lock into the hole on the top of the arm.
   
   
   8. Before use make sure the wiper arm is locked in to place on the wiper arm.
   
   
   

Congratulations! You just installed new WiperBladesUSA Gold Beam Blades
on your 2021 Buick Encore!

Having Trouble?

If you have a different AttachType than what we have listed please select the wiper arm type that best matches your vehicle: