Makes
More Car Makes

Chevrolet Cruze Years
More Chevrolet Cruze Years

Chevrolet Models
More Chevrolet Models
Chevrolet Wiper Blades

How to Change Trico 2016 Chevrolet Cruze Wiper Blades

Always check your vehicle's owner's manual for specific instructions on changing your wiper blades before removing/installing your wiper blades.
  1. Buy your new Trico® Tech Beam Blade wipers

    • Great all-weather beam wipers from Trico® The Leader in Wiper Blade Technology.
    • Beam blades from Trico® are a sleek low-profile styled "Memory Curved Steel®" beam covered in rubber and plastic to keep out rain, ice and debris. That means there are no frozen wiper joints to cause uneven wiping and streaking.
    • Just smooth consistently safe windshield wiping for your Chevrolet Cruze
    • Buy your Trico® Tech Beam Blade wipers for your 2016 Chevrolet Cruze $19.99 ea.

  2. Prepare your Chevrolet Cruze for an easier wiper change

    Turn ON your wipers then turn off your Chevrolet Cruze when the wipers are at their mid-way point on your windshield

  3. Lift your wipers up from the windshield

    With your wipers stopped midway on your windshield it should be easy to lift your wipers up and away from your windshield.
    Your old wipers should stick out, away, from your windshield. Now allowing for easy access during the rest of the changing process.

  4. Before you remove old wiper blades

    Be sure to take note of which new blade length goes on which side.
    Measure or just compare old blade length to the new Trico® wiper blades.
    Then place the new blades on the correct side.

  5. Remove old wiper blades

    Your 2016 Chevrolet Cruze has a pinch tab attachment for the windshield wipers. Press the tab or button. Then tilt or slide it off the old wiper.


    Different wiper manufacturers use different style attachments for the pinch tab.

  6. Connect the new Trico® Tech Beam Blade wipers

    With this arm type it is necessary to remove the preattached adaptor on the wiper blade and replace it as follows with adapter (BC)

    1. Push the small adapter lever toward the center of the blade.
    2. While doing step 1, lift the factory installed adaptor off of the blade and discard it.


    3. Find adaptor (BC) and press it on to the center of the blade. The two nubs inside of the adaptor onto the area on the blade marked "X".


    4. Press the tab on the front of adaptor (B).
    5. Lift shim (C) off of adaptor (B) and discard it. Tip: Press down on top edge of adaptor B to remove shim (C) easier.


    6. Hold your thumb firmly on the front of the adaptor, raising the back end up.
    7. Align the side arm tabs with the side tabs on the back end of the adaptor, and raise the blade into the underside of the arm.


    8. Rotate the blade up until the tip of the arm locks underneath the adaptor tab.


    9. The adaptor must lock on to the arm where indicated.




  7. Check all connections...

    Double check that wiper blades and adapters are locked on to the wiper arms.
    Remove any wiper blade plastic covers.

  8. Lower wipers back down to their functional positions.

    Carefully lower your new wipers down to your windshield. Discard old wipers and packaging material.


Congratulations! You just installed new Trico® Tech Beam Blade wipers on your 2016 Chevrolet Cruze!


Having Trouble?

If you have a different AttachType than what we have listed please select the wiper arm type that best matches your vehicle:

Because we guarantee them to fit
Rain-X WipersWiperBladesUSA WipersTrico Wipers
we sell only the very best wipers in the USA!