Makes
More Car Makes

Chevrolet SS Years
More Chevrolet SS Years

Chevrolet Models
More Chevrolet Models
Chevrolet Wiper Blades

How to Change 2017 Chevrolet SS Rain-X® Wiper Blades

Always check your vehicle's owner's manual for specific instructions on changing your wiper blades before removing/installing your wiper blades.
  1. Buy your new Rain-X® Latitude® Beam Blade wipers

    • Great all-weather beam wipers from Rain-X
    • Beam blades from Rain-X contour to the curvature of your windshield to provide even wiping pressure along the full length of the blade. That means there are no frozen wiper joints to cause uneven wiping and streaking.
    • Just smooth consistently safe windshield wiping for your Chevrolet SS
    • Buy your Rain-X Latitude Beam Blade wipers for your 2017 Chevrolet SS $26.99 ea.

  2. Prepare your Chevrolet SS for an easier wiper change

    Turn ON your wipers then turn off your Chevrolet SS when the wipers are at their mid-way point on your windshield

  3. Lift your wipers up from the windshield

    With your wipers stopped midway on your windshield it should be easy to lift your wipers up and away from your windshield.
    Your old wipers should stick out, away, from your windshield. Now allowing for easy access during the rest of the changing process.

  4. Before you remove old wiper blades

    Be sure to take note of which new blade length goes on which side.
    Measure or just compare old blade length to the new wiper blades.
    Then place the new blades on the correct side.

  5. Remove old wiper blades

    Your 2017 Chevrolet SS has a Pinch Tab Button (PTB) style attachment for the windshield wipers to connect with.
    Different wiper manufacturers use different style attachments for the Pinch Tab Button (PTB) attach type. Push the button and slide the wiper away from the arm.

  6. Connect the new Rain-X Latitude Beam Blade wipers

    • You must remove the entire pre-installed connector from the wiper.
      Method 1: Grasp the connector tightly and pull up sharply on it while holding the wiper with your other hand. It should come right off.

      Method 2: Use a small flat head screwdriver. Insert under connector about 1" and slowly pry up. It should come right off.

    • Attach the other connector.
      Make sure the the small arrow on the top of the wiper blade is pointing LEFT

      Center it over the bracket mount. Then press firmly down until it CLICKS into place.
    • Notice the "teeth" on the wiper arm and match them to the slots on the connector.
      Line them up and PUSH DOWN. Then slide the blade forward.
    • Finally secure the wiper in place by sliding the locking tab down until the release button snaps back in to place.
    • You'll know it's locked on when you hear/feel the CLICK
    • Be sure to REMOVE PLASTIC COVER FROM THE BLADE


  7. Check all connections...

    Tug on the wipers to double check that all wiper blades are locked on to the wiper arms.

  8. Lower wipers back down to their functional positions.

    Carefully lower your new wipers down to your windshield. Discard old wipers and packaging material.


Congratulations! You just installed new Rain-X Latitude Beam Blade wipers on your 2017 Chevrolet SS!


Having Trouble?

If you have a different AttachType than what we have listed please select the wiper arm type that best matches your vehicle:

Always check your vehicle's owner's manual for specific instructions on changing your wiper blades before removing/installing your wiper blades.
  1. Buy your new Rain-X® Latitude® w/Repellency Beam Blade wipers

    • Great all-weather beam wipers from Rain-X with rain Repellency built in
    • Beam blades from Rain-X contour to the curvature of your windshield to provide even wiping pressure along the full length of the blade. That means there are no frozen wiper joints to cause uneven wiping and streaking.
    • These beam blades are coated with the famous Rain-X water repellency coating
    • Just smooth consistently safe windshield wiping for your Chevrolet SS
    • Buy your Rain-X Latitude w/Repellency Beam Blade wipers for your 2017 Chevrolet SS $27.99 ea.

  2. Prepare your Chevrolet SS for an easier wiper change

    Turn ON your wipers then turn off your Chevrolet SS when the wipers are at their mid-way point on your windshield

  3. Lift your wipers up from the windshield

    With your wipers stopped midway on your windshield it should be easy to lift your wipers up and away from your windshield.
    Your old wipers should stick out, away, from your windshield. Now allowing for easy access during the rest of the changing process.

  4. Before you remove old wiper blades

    Be sure to take note of which new blade length goes on which side.
    Measure or just compare old blade length to the new wiper blades.
    Then place the new blades on the correct side.

  5. Remove old wiper blades

    Your 2017 Chevrolet SS has a Pinch Tab Button (PTB) attachment for the windshield wipers to connect with.

    Different wiper manufacturers use different style attachments for the Pinch Tab Button (PTB). Look for a button to push and slide off the old wiper blade.

  6. Connect the new Rain-X Latitude w/Repellency Beam Blade wipers

    • First pry off the adapter cover. Slide thumb nail under the corner of the cover and pull off with your other hand.

      Remove and discard outer cover.
    • Guide both sets of rear tabs in to the end of the wiper arm
      Slide the blade down, under the Rain-X logo, in the adapter channel until it CLICKS.
      After the CLICK the wiper is locked in to place.
    • Be sure to REMOVE PLASTIC COVER FROM THE BLADE
    • Check all connections...

      Tug on the wipers to double check that all wiper blades are locked on to the wiper arms.

    • Lower wipers back down to their functional positions.

      Carefully lower your new wipers down to your windshield. Discard old wipers and packaging material.

    • Finally Activate the Rain-X Water Repellency Technology.

      • Be sure your windshield is clean and dry.
      • Turn ON your new wiper blades. Run them DRY on your windshield for 2-3 minutes.
      • Then briefly spray your washer fluid and watch for water beading. That indicates the technology has been activated.



Congratulations! You just installed new Rain-X Latitude with Water Repellency Beam Blade wipers on your 2017 Chevrolet SS!


Having Trouble?

If you have a different AttachType than what we have listed please select the wiper arm type that best matches your vehicle:

Because we guarantee them to fit
Rain-X WipersWiperBladesUSA WipersTrico Wipers
we sell only the very best wipers in the USA!