How to Change 2011 BMW Alpina B7L Rain-X® Wiper Blades

1. Buy your new Rain-X® Longitude® Beam Blade wipers

   • Extended durablility for long-lasting performance from Rain-X
   • Smooth, chatter-free wipe for your BMW Alpina B7L's windshield
   • Significant noise reduction and wind lift
   • Buy your Bosch Evolution wipers for your 2011 BMW Alpina B7L$23.70 ea.

   

2. Prepare your BMW Alpina B7L for an easier wiper change

   Turn ON your wipers then turn off your BMW Alpina B7L when the wipers are at their mid-way point on your windshield
   

3. Lift your wipers up from the windshield

   With your wipers stopped midway on your windshield it should be easy to lift your wipers up and away from your windshield.
   Your old wipers should stick out, away, from your windshield. Now allowing for easy access during the rest of the changing process.

   

4. Before you remove old wiper blades

   Be sure to take note of which new blade length goes on which side.
   Measure or just compare old blade length to the new wiper blades.
   Then place the new blades on the correct side.

5. Remove old wiper blades

   Your 2011 BMW Alpina B7L has a Side Pin style attachment for the windshield wipers to connect with.
   Different wiper manufacturers use different style attachments for the Side Pin style attach type. With the arm lifted arm away from windshield: push the button then pull off the old wiper blade.

6. Connect the new Rain-X Longitude beam wipers

   • To install your new Rain-X Longitude wiper blade on a Side Pin arm the you must determine if you have Small Side Pin or Large:
     SMALL Side Pin arm:
     Open the default adapter and insert SMALL pin into the hole. Close cover to lock on.
     
     Close the latch with a "CLICK" to lock it on:
     
     
   • If your wiper arm side pin didn't fit. You have a LARGE Pin:
     How to install a LARGE Side Pin arm:
     Remove the internal adapter. Use a pen in the Small hole to assist with removing the internal adapter.
     
     Flip the internal adapter and press on to center post with the locking part lined up with the large hole in the adapter:
     
     Once internal adapter is SECURELY attached...lift up slightly to prepare for the LARGE Side Pin:
     
     Insert wiper on the LARGE hole:
     
     
     Now SNAP "Click" the internal adapter DOWN to LOCK wiper on the wiper arm:
     
     
   • REMEMBER: Remove the blade edge cover:
     
     
   • Do the same procedure for the other wiper blade.
   Small Pin

   
   

7. Large Pin

   
   

8. Check all connections...

   Tug on the wipers to double check that all wiper blades are locked on to the wiper arms.

9. Lower wipers back down to their functional positions.

   Carefully lower your new wipers down to your windshield. Discard old wipers and packaging material.
   

Congratulations! You just installed new Rain-X Longitude Beam Blade wipers on your 2011 BMW Alpina B7L!

Having Trouble?

If you have a different AttachType than what we have listed please select the wiper arm type that best matches your vehicle: