Prepare your Chevrolet Trailblazer for an easier wiper change
Turn ON your wipers then turn off your Chevrolet Trailblazer when the wipers are at their mid-way point on your windshield
Lift your wipers up from the windshield
With your wipers stopped midway on your windshield it should be easy to lift your wipers up and away from your windshield. Your old wipers should stick out, away, from your windshield. Now allowing for easy access during the rest of the changing process.
Before you remove old wiper blades
Be sure to take note of which new blade length goes on which side. Measure or just compare old blade length to the new wiper blades. Then place the new blades on the correct side.
Remove old wiper blades
Your 2002 Chevrolet Trailblazer has a Small J Hook (9 X 3 HOOK) type attachment for the windshield wipers to connect with.
Different wiper manufacturers use different style attachments for the Small J Hook (9 X 3 HOOK). Look for a button to push and slide off the old wiper blade.
Connect the new Rain-X Weatherbeater Wiper Blades
Insert the curved part of the J hook through the top opening of the wiper blade. Guide the wiper blade in to the J hook and pull upward on the wiper until it locks in to place.
Check all connections...
Tug on the wipers to double check that all wiper blades are locked on to the wiper arms.
Lower wipers back down to their functional positions.
Carefully lower your new wipers down to your windshield. Discard old wipers and packaging material.
Congratulations! You just installed new Rain-X Weatherbeater Wiper Blades on your 2002 Chevrolet Trailblazer!
Having Trouble?
If you have a different AttachType than what we have listed please select the wiper arm type that best matches your vehicle:
Always check your vehicle's owner's manual for specific instructions on changing your wiper blades before removing/installing your wiper blades.
Items Included:
Qty: 1
Sku: RXL-22
Driver
Rain-X Latitude Beam Wiper Blades
Qty: 1
Sku: RXL-22
Passenger
Rain-X Latitude Beam Wiper Blades
Qty: 1
Sku: WBUMicro
WiperBladesUSA MicroFiber Interior Car Wipe
Buy your new Rain-X® Latitude® Beam Blade wipers
Great all-weather beam wipers from Rain-X
Beam blades from Rain-X contour to the curvature of your windshield to provide even wiping pressure along the full length of the blade. That means there are no frozen wiper joints to cause uneven wiping and streaking.
Just smooth consistently safe windshield wiping for your Chevrolet Trailblazer
Prepare your Chevrolet Trailblazer for an easier wiper change
Turn ON your wipers then turn off your Chevrolet Trailblazer when the wipers are at their mid-way point on your windshield
Lift your wipers up from the windshield
With your wipers stopped midway on your windshield it should be easy to lift your wipers up and away from your windshield. Your old wipers should stick out, away, from your windshield. Now allowing for easy access during the rest of the changing process.
Before you remove old wiper blades
Be sure to take note of which new blade length goes on which side. Measure or just compare old blade length to the new wiper blades. Then place the new blades on the correct side.
Remove old wiper blades
Your 2002 Chevrolet Trailblazer has a small J hook (9X3) attachment for the windshield wipers to connect with.
Different wiper manufacturers use different style attachments for the small hook. Look for a button or a latch to lift and slide off the old wiper blade.
Connect the new Rain-X Latitude Beam Blade wipers
Slide the new blade on to the hook and push the blade in to the armhook until it locks in place.
You will hear/feel the CLICK when the Rain-X Latitude beam blade locks in place.
Be sure to REMOVE PLASTIC COVER FROM THE BLADE
Check all connections...
Tug on the wipers to double check that all wiper blades are locked on to the wiper arms.
Lower wipers back down to their functional positions.
Carefully lower your new wipers down to your windshield. Discard old wipers and packaging material.
Congratulations! You just installed new Rain-X Latitude Beam Blade wipers on your 2002 Chevrolet Trailblazer!
Having Trouble?
If you have a different AttachType than what we have listed please select the wiper arm type that best matches your vehicle:
Always check your vehicle's owner's manual for specific instructions on changing your wiper blades before removing/installing your wiper blades.
Items Included:
Qty: 1
Sku: RXL-WR22
Driver
Rain-X Latitude Wipers with Water Repellency
Qty: 1
Sku: RXL-WR22
Passenger
Rain-X Latitude Wipers with Water Repellency
Qty: 1
Sku: WBUMicro
WiperBladesUSA MicroFiber Interior Car Wipe
Buy your new Rain-X® Latitude® w/Repellency Beam Blade wipers
Great all-weather beam wipers from Rain-X with rain Repellency built in
Beam blades from Rain-X contour to the curvature of your windshield to provide even wiping pressure along the full length of the blade. That means there are no frozen wiper joints to cause uneven wiping and streaking.
These beam blades are coated with the famous Rain-X water repellency coating
Just smooth consistently safe windshield wiping for your Chevrolet Trailblazer
Prepare your Chevrolet Trailblazer for an easier wiper change
Turn ON your wipers then turn off your Chevrolet Trailblazer when the wipers are at their mid-way point on your windshield
Lift your wipers up from the windshield
With your wipers stopped midway on your windshield it should be easy to lift your wipers up and away from your windshield. Your old wipers should stick out, away, from your windshield. Now allowing for easy access during the rest of the changing process.
Before you remove old wiper blades
Be sure to take note of which new blade length goes on which side. Measure or just compare old blade length to the new wiper blades. Then place the new blades on the correct side.
Remove old wiper blades
Your 2002 Chevrolet Trailblazer has a small J hook (9X3) attachment for the windshield wipers to connect with.
Different wiper manufacturers use different style attachments for the small hook. Look for a button or a latch to lift and slide off the old wiper blade.
Connect the new Rain-X Latitude w/Repellency Beam Blade wipers
Open the universal adapter's locking tab.
If you have trouble opening it with your fingers. Try using a quarter.
Insert the hook part of the arm into the opening on the adapter.
Slide the blade up until it is snug.
Close the locking tab. Press down until it locks closed with a CLICK.
Be sure to REMOVE PLASTIC COVER FROM THE BLADE
Check all connections...
Tug on the wipers to double check that all wiper blades are locked on to the wiper arms.
Lower wipers back down to their functional positions.
Carefully lower your new wipers down to your windshield. Discard old wipers and packaging material.
Finally Activate the Rain-X Water Repellency Technology.
Be sure your windshield is clean and dry.
Turn ON your new wiper blades. Run them DRY on your windshield for 2-3 minutes.
Then briefly spray your washer fluid and watch for water beading. That indicates the technology has been activated.
Congratulations! You just installed new Rain-X Latitude with Water Repellency Beam Blade wipers on your 2002 Chevrolet Trailblazer!
Having Trouble?
If you have a different AttachType than what we have listed please select the wiper arm type that best matches your vehicle: