Makes
More Car Makes

BMW 135i Years
More BMW 135i Years

BMW Models
More BMW Models
BMW Wiper Blades

How to Change 2008 BMW 135i WiperBladesUSA® Wiper Blades

Always check your vehicle's owner's manual for specific instructions on changing your wiper blades before removing/installing your wiper blades.
  1. Buy your new WiperBladesUSA® Gold Beam Blade wipers

    • Affordable all-weather beam wipers from WiperBladesUSA
    • Beam blades from WiperBladesUSA contour to the curvature of your windshield to provide even wiping pressure along the full length of the blade. That means there are no frozen wiper joints to cause uneven wiping and streaking.
    • Just smooth consistently safe windshield wiping for your BMW 135i
    • Buy your WiperBladesUSA Gold Beam Blade wipers for your 2008 BMW 135i $14.99 ea.

  2. Prepare your BMW 135i for an easier wiper change

    Turn ON your wipers then turn off your BMW 135i when the wipers are at their mid-way point on your windshield

  3. Lift your wipers up from the windshield

    With your wipers stopped midway on your windshield it should be easy to lift your wipers up and away from your windshield.
    Your old wipers should stick out, away, from your windshield. Now allowing for easy access during the rest of the changing process.

  4. Before you remove old wiper blades

    Be sure to take note of which new blade length goes on which side.
    Measure or just compare old blade length to the new wiper blades.
    Then place the new blades on the correct side.

  5. Remove old wiper blades

    Your 2008 BMW 135i has a Pinch Tab attachment for the windshield wipers to connect with.

    Different wiper manufacturers use different style attachments for the Pinch tabindex. Look also for a button or a latch to lift and slide off the old wiper blade.

  6. Connect the new WiperBladesUSA Gold Beam Blade wipers

    If your wipers do NOT have the B1 adapter on:

    1. Your vehicle will require the B1 adapter on your wiper blade. Check your wiper for the B1 logo.
      If this is not installed it is a simple process:
    2. Press the latch in with your thumb and lift off the old adapter.
    3. Place the back of the B1 adapter in the wiper
    4. Press the front down until it CLICKS in place
    • Insert the TAB part of the wiper arm into the receiving hole on the wiper.
    • Use your right thumb and finger to squeeze the "wings" in. The tip up the wiper to LOCK in place.
    • Here is how a properly installed Pinch Tab wiper should look!
  7. Be sure to REMOVE PLASTIC COVER FROM THE BLADES EDGE
  8. Check all connections...

    Tug on the wipers to double check that all wiper blades are locked on to the wiper arms.

  9. Lower wipers back down to their functional positions.

    Carefully lower your new wipers down to your windshield. Discard old wipers and packaging material.



Congratulations! You just installed new WiperBladesUSA Gold Beam Blade wipers on your 2008 BMW 135i!


Having Trouble?

If you have a different AttachType than what we have listed please select the wiper arm type that best matches your vehicle:

Because we guarantee them to fit
Rain-X WipersWiperBladesUSA WipersTrico Wipers
we sell only the very best wipers in the USA!